Forum Settings
       
This thread is locked

New gaming PC/SSD questionsFollow

#1 Jun 03 2013 at 11:06 AM Rating: Good
*
202 posts
So I've got a new gaming PC coming and it has an SSD in it as well as a regular mechanical hard drive. I've never used an SSD before and was hoping Kaolian or others could comment on some of the things I've been reading. First of all, the specs of the system I've got coming.

Intel Core i5 3570K 3.40 GHz
ASUS P8Z77-V LX (Intel Z77 Chipset)
8GB DDR3 1600MHz Corsair Vengeance Series
600W Corsair CX power supply
HD 1: (for the OS)120GB SSD Corsair Neutron GTX Series SATA 6Gbps
HD2: (for Multimedia\Data) 1TB Western Digital 7200 RPM 64MB Cache
NVIDIA GeForce GTX 670 2GB
Microsoft Windows 7 Home Premium (64-Bit Edition)
Asus VS239H-P monitor


I've read that these are some of the recommendations with SSD's: http://www.computing.net/howtos/show/solid-state-drive-ssd-tweaks-for-windows-7/552.html
1.You should have AHCI setting enabled in BIOS before you install the OS

2. You should disable Sleep/Hibernation function in windows

3. Disable System Restore

4. Disable Drive Indexing

5. Disable Drive Defragmentation schedule

6. Disable Prefetch/Superfetch

7. Disable Windows Write-Cache buffer flushing

8. Disable ClearPageFileAtShutdown/LargeSystemCache

9. Change power setting to never let HD turn off

Has anyone done any of this on their SSD and did it make any difference in performance either immediately or over the long run?

Edited, Sep 23rd 2013 10:01pm by Kaolian Lock Thread: spammer keeps bumping this thread
#2 Jun 03 2013 at 12:58 PM Rating: Good
Worst. Title. Ever!
*****
17,302 posts
I believe that all those options are to reduce the read/write cycles on the memory. Flash memory has a finite number of cycle before the dies. Usually a very high number.

Mine is a 256GB Samsung 840, and I do not have a scheduled defrag cycle, and never defrag it. I also do not use the sleep/hibernation or idle power off etc. Mine's in a desktop. The other suggestions I've never used and wouldn't be able to tell you whether or not they are done on my PC.

On a side note, maybe I'm wrong, but 600W power supply seems a little low for your system.



Edited, Jun 3rd 2013 2:59pm by TirithRR
____________________________
Can't sleep, clown will eat me.
#3 Jun 03 2013 at 2:49 PM Rating: Excellent
Avatar
******
29,919 posts
Quote:
1.You should have AHCI setting enabled in BIOS before you install the OS

Yes. AHCI, or Advanced Host Controller Interface is going to allow for faster drive throughput than the standard "IDE compatable" setting. SSD's still don't RAID well, but you would pick RAID over AHCI if you wanted to mirror or RAID 5 a set of SSD's instead of a single one. The controller type you pick determines which mass storage device driver windows loads at installation. If you change that setting after windows installation, chances are you will get a blue screen error code 0x00007b on reboot until you change it back or reinstall windows.

Quote:
2. You should disable Sleep/Hibernation function in windows

Sleep / hibernation actually works better with a SSD than it does for a normal drive, so I'm not sure why they put that one on there. that being said, sleep and hibernation is annoying and locks up more than it should anyways, so I'd disable it anyways.

Quote:
3. Disable System Restore

takes up a bunch of room, rarely successful if you do try to undo something, so yeah assuming you have adequate backups I would turn that off.

Quote:
4. Disable Drive Indexing

Depends on how often you search for files. if you rarely ever use the file search function, sure, turn it off. If you use it all the time, then i'd leve it on. the wear and tear on a SSD from indexing is minimal.

Quote:
5. Disable Drive Defragmentation schedule

Windows 7 already will automatically not defragment a SSD. You still want to defragment your rotational drives though, so this isn't necessary.

Quote:
6. Disable Prefetch/Superfetch

windows 7 already automatically disables this for SSD's.

Quote:
7. Disable Windows Write-Cache buffer flushing

Should improve your data write speeds slightly on a SSD, make them slower on a rotational drive.

Quote:
8. Disable ClearPageFileAtShutdown/LargeSystemCache

clear pagefile at shutdown is usually already disabled. If you have more than 8GB ram, system cache size is irrelevent.

Quote:
9. Change power setting to never let HD turn off

The SSD isn't going to use much power at idle, and your rotational drives do, setting that particular setting isn't per drive, it's across the board, so doing this will tend to burn out your rotational drives sooner than they would otherwise due to bearing / controller wear.


____________________________
Arch Duke Kaolian Drachensborn, lvl 95 Ranger, Unrest Server
Tech support forum | FAQ (Support) | Mobile Zam: http://m.zam.com (Premium only)
Forum Rules
#4 Jun 03 2013 at 2:52 PM Rating: Excellent
Avatar
******
29,919 posts
TirithRR wrote:


On a side note, maybe I'm wrong, but 600W power supply seems a little low for your system.


For the current configuration it's fine. If they ever wanted to add a second video card in SLI mode, its a bit small.
____________________________
Arch Duke Kaolian Drachensborn, lvl 95 Ranger, Unrest Server
Tech support forum | FAQ (Support) | Mobile Zam: http://m.zam.com (Premium only)
Forum Rules
#5 Jun 04 2013 at 12:11 AM Rating: Good
*
87 posts
#6 Jun 04 2013 at 7:39 AM Rating: Good
*
202 posts
I appreciate all of the input and suggestions! I will be making changes where appropriate.

In regards to the power supply, I don't ever intend on adding a second video card, but I will keep an eye out for problems if I ever add other hardware (more hard drives, sound card, etc)
This thread is locked
You cannot post in a locked topic!
Recent Visitors: 14 All times are in CST
Anonymous Guests (14)